420 774 335 397 www.sharks-shop.cz Stránka 24
●
Push ground stakes through blower base holes. You may need to use a hammes for proper
placement.
●
Make sure the blower (air pump) power switch is in the OFF position. Ensure the power connections
are safely sited and tripping hazard is minimized.
●
The blower (air pump) should be securely sited and affixed to the ground before use. Plug the
blower /air pump) into an approved ground outlet.
●
Ensure the blower (air pump) is free from debris and securely sited to avoid tripping.
●
Turn the blower (air pump) power switch to ON. The continual air-flow blower (air pump) must be left
ON at all time while the product is being used. (refer to picture E).
●
The product should be fully inflated.
●
Ground support stakes are used for lawn ground surfaces. Hook and fit each provided ground stake
through each loop in the product. To prevent overturn or lift during playing, push stakes firmly into the
soil. Make sure the hooked end of the stake is over the loop at all time during use. The stakes should
be placed level with or under the ground in order to reduce tripping hazards. (refer to picture F).
●
Please check the age recommendation and user weights (printed on the product). You must not
exceed the total weight for the product.
●
Put the included play accessories if any for playing into the product. (refer to picture G,H).
●
If the product comes with support cushions at the sides, do not stand or sit on the cushions.
●
Make sure the water slide is fully inflated before children enter to play.
Hint: Air leak from the seams is necessary because the product is inflated by constant air flow and this
leakage is required to stop the product becoming over-inflated.
Hint: The sliding surface of the product shall not face to the sun as sun shine can glare the children´s
eyes when they are sliding down along the slide.
Take down
●
Make sure all children exit the product.
●
Makes sure the product is free from foreign objects.
●
If the product comex with water bags, please follow the undermentioned instruction, otherwise,
overleap this point. Detach the water bags from the product. Remove the product and blower before
opening the stopple fr draining. Empty water in the water bags and dry then in cool place for next
time´s use.
●
Turn of the watter supply, and empty water in to pool at the end.
●
Turn the blower (air pump) power switch to OFF.
●
Unplug the blower (air pump) power cord.
●
Loosen the Velcro and detach the inflation tube from the blower.
●
The product should deflate on its own within 5 minutes. Make sure the product is entirely deflated.
(refer to picture I).
●
Remove ground support stakes.
●
Fold the product in half from both ends, and then fold it in half 2 more times from both sides,
vertically to th first fold. (reffer to picture J, K, L).
●
Roll it up tightly from the end opposite the inflation tube. (refer to picture M, N).
●
Slip the carry bag over the folded product and stakes (plastic balls or water bags). Zip the bag. (refer
to picture O).
