SHP V2
7
5.4 Checking All Connections
Ensure that all devices are properly connected. Close the PC case. Connect the power cord with the power
supply and wall outlet. Turn the power supply on. This completes the installation of the power supply.
Note:
All connectors are designed to avoid misconnection. If the connectors are unable to connect to the main-
board, drives or peripheral devices, please check if both connectors are attached in the correct orientation.
Do not force to plug the connectors within the incorrect orientation, nor modify any of the components, as
this will damage the power supply and other hardware. SHARKOON warranty does not cover damage cause
by incorrect handling.
6. Troubleshooting
If the power supply does not work properly, please check the following:
1. Is the power cord correctly inserted into a wall outlet and the power inlet of the power supply?
2. Ensure that the on/off switch is in the “I” position.
3. Check if the 20+4-pin mainboard connector and the 4+4-pin CPU connector are correctly attached to the
mainboard.
4. Check if the cable is securely connected to the port of the peripheral devices.
5. Unplug the power cord from the wall outlet and let the power supply rest for about 10 minutes.
This will trigger a reset of the protection circuitry.
If the system still does not start, please contact [email protected].
Summary of Contents for SHP650
Page 1: ...Manual...