SHP
7
5.1 Installing a Power Supply into a PC Case
1. Insert the power supply into the PC case and place it against the power supply bracket on the
rear panel. For additional information, refer to the PC case’s manual.
2. Attach the power supply from the outside of the case using the provided screws. Ensure that
the fan and air vents of the built-in power supply are not covered.
5.2 Connect the Mainboard and Graphics Card(s)
1. Plug the 20+4-pin mainboard connector (Fig. 1) into
the respective port on the mainboard.
Fig. 1: 20+4-Pin Mainboard Connector
2. If your mainboard also features either a 4-pin or
4+4-pin CPU connector, connect the plug with the
mainboard port (Fig. 2).
Fig. 2: 4+4-Pin CPU Connector
Note:
The power connection of the mainboard depends on the vendor and may vary. For detailed in-
formation on how to establish the power connector, please refer to your mainboard’s manual.
3. If your PCIe graphics card requires an additional
power supply, connected the 6-pin or 6+2-pin PCIe
connector to ensure the graphics card receives a
stable power supply.
Fig. 3: 6+2-Pin PCIe Connector
5.3 Connecting Optical Drives and Other Peripheral Devices
1. Connect the 4-pin IDE connector (Fig. 4), SATA connector (Fig. 5) and the 4-pin Floppy connector
(Fig. 6) with the corresponding peripheral devices.
Fig. 4: 4-Pin IDE Connector Fig. 5: SATA Connector Fig. 6: Floppy Connector
Note:
For additional information, refer to the respective manuals of your drives and peripheral devices.
Summary of Contents for SHP550
Page 1: ......
