7
A
A
B
C
D
Fig. 8
Fig. 9
ENGLISH
6. DISASSEMBLY OF THE INNER EXPANDING
FOAM PADDING OF THE CHEEK PADS
To make it easier to wash the inner
comfort padding components, the cheek
pads of the helmet are fitted with inner
expanding foam padding that can be
removed from the fabric lining. To remove
the padding, proceed as follows after
removing the cheek pads from the helmet
(see instructions above).
6.1.
Unhook the three eyelets of the rear
frame of the left cheek pad next to the
two hooks “A” (top and front) and snap
button “D” (rear) on its back, respectively
(Fig. 8).
6.2.
Take the top “B” and bottom “C” flaps
of the frame out of the respective loops on
the back of the frame (Fig. 8).
6.3.
Gently remove the inner expanding
foam padding from the fabric lining of the
cheek pad (Fig. 9).
6.4.
Repeat these steps with the right
cheek pad.
