Shark Vantime Manual Download Page 9

9

B

A

Sun visor.

SHARK Vantime is equipped with a sun visor 

with an integrated external control.

This  ergonomic  command  allows  to  operate 

the visor from the outside with ease and wha-
tever  the  type  of  gloves  worn,  offering  you 
a  fast  and  full  protection  security.  The  R&D  
department  has  developed  a  mechanism 
for  obtaining  a  progressive  movement  of  the 
control. The sun visor has a 380 UV protection 
to filter out 100% of UVA and UVB.

Warning:

  This  sun  visor  can  be  used  only  

in  bright  glare  and  when  you’re  not  riding  
in an area in which you risk having a sudden 
change  in  visibility  (ex  tunnel).  In  all  cases 
where  visibility  is  reduced,  the  beginning  or 
end of the day, night, rain or fog, the sun visor 
must be set high to not to degrade your vision.

The visor is operated by the elastomer button 
located on the left side of the helmet (A-B).

maintenance.

For protection and improve its life, the outer 

surface  of  your  sun  visor  SHARK  Vantime  is  
anti-scratch treated. When cleaning the screen, 
use lukewarm water (below 40 degrees) and  
a soft cloth (100% cotton and lint) to wipe the 
screen. Neutral soap as “savon de Marseille” 
can help you clean up.

Warning:

  If  your  visor  and/or  sun  shield  no 

longer  provides  you  with  clear  visibility,  you 
must immediately replace it.  Never ride if your 
sun  shield  is  scratched,  dirty,  foggy  or  with 
your vision obscured in any way.  Always ride 
with perfect visibility. Never ride with the sun 
shield  as eye protection. You must always ride 
with the visor in the lowered position.

SUn VISoR

Summary of Contents for Vantime

















Reviews: