10
FREEPHONE 0800 862 0453
11
www.sharkclean.eu
EMPTYING THE NO TOUCH DUST CUP
1
To achieve the best
performance, empty the No
Touch Dust Cup after each use.
Press the No Touch Dust Cup
release pedal on back of the
unit to remove the No-Touch No
Touch Dust Cup.
(Fig. 7)
2
Hold the No Touch Dust Cup
over a rubbish bin and push
the No Touch Dust Cup empty
button located on the lower
portion of the handle. The trap
door will spring open and release
the debris into the rubbish bin.
(Fig. 8)
3
To re-insert the No Touch Dust
Cup, position it over the unit and
press down gently until it snaps
into place.
(Fig. 9)
For easy insertion into the base,
tip the No Touch Dust Cup
slightly forward.
STORING YOUR SHARK
®
CORDLESS SWEEPER
CAUTION:
Any electronic
appliance should not be stored in
or exposed to areas of high heat
or humidity. Do not store the
unit close to stoves, radiators,
furnaces or in a bathroom or
bathing area.
1
Properly storing your unit will
keep it ready to go the next time
you want to use it. Store the unit
in a dry area where it won’t be
exposed to the elements.
2
When storing your cordless
sweeper, hang the handle from
a hook.
3
Always empty the No Touch
Dust Cup before storing.
Fig. 10
4
Pull back on the handle and
press lightly on the body of the
unit with your foot.
(Fig. 10)
5
Lift the unit and rotate the base
one quarter turn so that you can
lay it flat against the wall. Hang
the unit using the handle from a
hook secured to a wall or other
vertical surface.
(Fig. 11)
Fig. 11
If the brush roll stops
moving, it’s probably due
to the anti-jam feature.
This feature protects the
motor from becoming
overheated. If the brush
becomes overloaded, it will
stop turning and both speed
indicator and the first LED
light will flash. Turn off your
unit by pressing the power
button once. See page 12
for further instructions
on removing or cleaning
the brush roll. Wait for 10
seconds to let your unit cool
down. Now press the power
button again and you’re
ready to resume cleaning!
1
Press the power button to start
the unit. When finished cleaning,
press the power button again to
turn the unit off.
(Fig. 4)
2
When turning on the unit, the
speed setting will automatically
go to
HI
. You can adjust the
speed of the brush roll to suit
the floors that you are cleaning.
Press the speed button to switch
between speeds.
One light “
LO
” indicates the
speed optimized to clean bare
floors and two lights “
HI
”
indicate the speed optimized to
clean carpets and larger debris
on bare floors.
(Fig. 5)
USING YOUR SHARK
®
CORDLESS SWEEPER
3
The telescopic tube is designed
to adjust to the height that is
comfortable for all users. To
adjust the height, push down the
release button on the telescopic
tube and pull the handle up to
adjust it to a comfortable height
for using.
(Fig. 6)
4
Do not use the unit to pick up
liquids or clean wet floors.
5
Do not use the unit on concrete,
tar or other rough surfaces.
6
Do not use the unit to pick up
pieces of string or fabrics. Do
not use the unit to clean tasseled
or frayed carpets.
Fig. 6
Fig. 4
Fig. 5
Fig. 8
Fig. 7
Fig. 9