7
www.sharkclean.com
1
Always make sure that the unit
is turned off. (
Fig. 3
)
2
Insert the charger plug into the
hole on the back of the unit.
Plug the charger into a wall
outlet. The light next to the
power button will illuminate
when the unit is charging. If the
unit is plugged in and the light is
not illuminated, press the power
button once. The light should
now be illuminated indicating
that the unit is charging. (
Fig. 4
)
Fig. 5
CHARGING YOUR CORDLESS FLOOR AND CARPET SWEEPER
3
Charge the battery for 7 hours
before initial use and 7 hours
for each recharge. Our cordless
floor and carpet sweeper is
powered by Ni-MH batteries
that need this time to build up
their charge.
4
Always remove the charging
adapter from the unit after the
charging period has completed.
Storing the unit with the
adapter attached and
plugged in will reduce the
battery life
.
IMPORTANT:
Although many
adapters look similar, it’s
important to use only the
adapter that came with the unit
(XA2700).
Fig. 3
Fig. 4
4
Do not use the unit to pick
up pieces of string or fabrics.
Do not use the unit to clean
tasseled or frayed carpets.
1
Press the power button to start
the unit. The light on the unit
will illuminate. When finished
cleaning, press the power
button again to turn the unit off.
(
Fig. 5
)
USING YOUR CORDLESS FLOOR AND CARPET SWEEPER
2
Do not use the unit to pick up
liquids or clean wet floors.
3
Do not use the unit on concrete,
tar or other rough surfaces.
OFF
