5
www.sharkclean.com
MOP
SCRUB
fig. 10
fig. 11
fig. 12
fig. 13
Using the Steam Energized
™
Cleanser:
1
Make sure that the batteries are inserted into
the battery compartment behind the reusable
bottle. See page 3.
2
Press the Spray Button to apply solution onto the
floor that is to be cleaned. (
Fig. 12, Fig. 13
)
3
If the Cleanser Bottle is empty, you can replace it
at any time as long as the unit is unplugged from
the electrical outlet.
IMPORTANT:
Never leave the Professional
Steam & Spray
™
Mop with a damp/wet cleaning
pad on any floor surface for any amount of time
as this may damage the floor.
4
Once finished, step on the tab at the back of
the cleaning pad and lift the unit to remove the
cleaning pad.
Selecting Your Steam Setting:
1
Press the
ON/STANDBY
button once
for
SaniFiber
™
disposable pad setting
(
SaniFiber
™
disposable pad lighted setting
indicator will illuminate).
SaniFiber
™
disposable pad setting is designed to deliver
the perfect amount of steam for your SaniFiber
™
pads. It can also be used with your washable
pad for a quick dusting. (
Fig. 10
)
Press the
ON/STANDBY
button a second time
to activate the
MOP
setting.
MOP
setting is for
normal, everyday steam cleaning.
Press the
ON/STANDBY
button a third time to
activate the
SCRUB
setting.
SCRUB
setting is
for heavy cleaning and will leave floors damp
.
To better understand which steam setting to use
for your cleaning task, turn to page 7.
2
Clean your floors with a forward and backward
motion.
(
Fig. 11
)
3
Press the
ON/STANDBY
button until the light
flashes to stop the steam
.
WARNING
: Never stand on the Professional
Steam & Spray
™
Mop.
4
When the water tank is empty, the steam mop
will stop producing steam. You can refill the
water tank at any time as long as the mop is
unplugged from the electrical outlet. Follow
instructions on page 4.