2
TOLL FREE:
1-800-798-7398
YOUR SHARK
®
EASY SPRAY
™
STEAM
MOP IS EASY TO ASSEMBLE
1
First remove all the parts from the package. We
know you’re excited about the Shark
®
Easy
Spray
™
Steam Mop, but don’t plug it in until
it’s fully assembled and you’ve read all of the
following instructions.
2
Slide the upper extension tube (the tube with the
handle) into the lower extension tube (the short
tube). Push the two extension tubes together
until you hear it click into place. See illustration
for a visual explanation. (
fig. 1
)
3
Insert the pieces you assembled in Step 2 into
the pump actuator (the tube that leads to the
tank). Push the extension tube assembly and
pump actuator together in until you hear it click
into place. Insert cord into cord clip on the shaft
of the steam-mop. (
fig. 2
)
A
SSEMBL
Y
fig. 1
fig. 2
IMPORTANT:
Always make sure that your
Easy Spray
™
Steam Mop is unplugged from the
wall before you attach a cleaning pad to avoid
damage to your floor and mop.
IMPORTANT
: Do not use on unsealed wood
or unglazed ceramic floors. On surfaces that
have been treated with wax or some no wax
floors, the sheen may be removed by the heat
and steam action. It is always recommended to
test an isolated area of the surface to be cleaned
before proceeding. We recommend that you
check the use and care instructions from the
floor manufacturer.
