u vwx yz
y
u { v
x
|
} ~
v. 04/14A
OPERA
T
OR’S MANU
AL
PRESSURE W
ASHER
COMPONENT IDENTIFICATION
Pump — Develops high pressure.
Starter Grip — (Not Shown) Used for starting the
en gine man u al ly.
Spray Gun — Controls the application of water and
de ter gent onto cleaning surface with trigger device.
In cludes safe ty latch.
Detergent Injector — Allows you to siphon and mix
de ter gents.
Variable Pressure Control Wand — Must be con-
nect ed to the spray gun. This wand handle controls
dishcharge flow from one tube to both wand tubes.
When water is discharged from both tubes you will have
a pres sure loss and allows chemical siphoning when
used in combination with a detergent injector.
High Pressure Hose — Connect one end to water
pump dis charge nipple and the other end to spray
gun.
Note: If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm
water will dis charge from pump protector onto floor.
This sys tem pre vents internal pump dam age.
Switch
Brass
Soap
Nozzle
Nozzle
Quick
Coupler
Spray
Gun
High Pressure
Hose
Detergent
Injector
Quick
Coupler
Collar
Discharge
Nipple
Water Supply
Hose
(not included)
Gasoline
Tank
Wand Coupler
Variable Pressure
Control wand
Control Wand
Handle
Trigger
Swivel
Connector
Battery Box
Pump