background image

8

TOLL FREE:

 

1-800-798-7398

9

www.sharkcompany.com

English

Care of Your Steam Mop

 

2  

Remove the micro-fiber cleaning 
pocket by releasing the quick 
fasteners and using the lavender 
loop on the side of the pocket, 
avoiding contact with the hot pocket 
or dirt. Then empty the water tank. 

 

IMPORTANT: 

Be very careful 

because the cleaning pockets can 
get very hot from the steam, so use 
caution when removing them. Let 
the unit cool 2-3 minutes. 

3

  To store the Shark

®

 Steam Mop 

hanging up; first remove the head 
(after it has cooled and the steam 
has been released) then hang on a 
large hook.

 

NOTE:

 If you want to store it 

standing upright then make sure 
it’s leaning against a wall for added 
support and safety. Always store 
your Steam Mop with the micro-fiber  
pocket removed, away from children 
or high traffic areas.

   AFTER USE AND STORAGE

1

  When you have finished using 

the steam mop, and your floors 
are clean, unplug the cord from 
the outlet and move it into an 
upright position. Let the unit cool 
2-3 minutes and release steam by 
pumping the handle several times 
before removing the micro-fiber 
cleaning pocket from the mop head. 

1

2

3

Using Your Carpet Glider

 

THE CARPET GLIDER  

 1

  The Carpet Glider can be used with 

the Rectangle head to lightly steam 
your carpet and area rugs. Just place 
the mop head on top of the glider 
and move back and forth across a 
section of the carpet. The steam mop 
won’t clean your carpeting or areas 
rugs, but it’s great for deodorizing 
and freshening. 

 

NOTE:

 Please note that the Steam 

Mop rests on top of the carpet glider 
and it is not a fixed attachment.  
Do not leave steam mop with carpet 
glider in one stationary position for 
any period of time.

1

The Steam Mop won’t clean 
your carpeting or area 
rugs. However, it’s great for 
deodorizing and freshening.

Summary of Contents for S3501CO












Reviews: