8
www.sharkninjamanuals.com
IMPORTANT: Your steam mop needs water
to make steam! Never use your steam mop
without water in the tank.
Sweep or vacuum your floors prior to cleaning with
your Light & Easy
™
Steam Mop.
Using Your Light & Easy
™
Steam Mop
1
Pull and twist the quick release cord holder to
unwrap the power cord completely.
(fig. 6)
Plug into
a 220-240 volt electrical outlet.
The “On” light will
turn blue. If the light does not turn on, reference the
troubleshooting section on page 12.
(fig. 7)
When you use your steam mop for the first time or
if you have not used the unit in awhile, it may take a
minute or two for the water to travel through the pump
and into the heater to create steam. Get it started by
pumping the handle a few times. If you have waited a few
minutes and you still do not see any steam, reference the
troubleshooting section on page 12.
fig. 6
fig. 7