2
WARNING: No helmet can
protect the wearer from all fo-
reseeable high or low speed impacts.
However, for maximum protection,
the helmet must be of proper fit and
the chin strap must be securely fas-
tened as described in this manual.
Failure to have a proper fit and to se-
curely fasten the chin strap is dange-
rous, as the helmet could come off in
an accident, resulting in severe head
injury or death.
CHOOSE
YOUR SIZE
each helmet is designed
to correspond to a head
measurement (from for Xs up to Xl).
To measure your head size, wrap a
tape measure horizontally around
your head at a height of approxima-
tely one inch (2.5cm) above your
eyebrows. If your head measurement
falls between two sizes, first try on
the smaller helmet. However, be-
cause of different head shapes, this
size reference can only be considered
as a guide. For maximum protection,
it is necessary to check that the hel-
met is well suited for the shape of
your head. when trying a brand new
helmet, make sure that your head is
pushed into the helmet as far as pos-
sible, with the front part just above
your eyebrows, and with the chin
strap securely fastened as described
on the next page.
1
.
The helmet should feel very snug
all around your head and fairly tight
on the cheek pads. If not, it is too big
for you; select a smaller size.
see figure a.
B
S800 DOT-V02.indd 2
13/04/06 10:21:28