13
English
Using Your Press & Refresh
™
- cont.
Care of Your Press & Refresh
™
Cleaning & storing
1
Turn the garment steamer off
“O”.
2
Unplug the appliance from the
electrical outlet.
3
Let the appliance cool
completely for approximately
30 minutes.
4
Empty the water from the
water tank.
5
Wipe the exterior of the
garment steamer with a damp
cloth and wipe dry if needed.
9
Hand wash the bonnet in cold
water with a mild detergent and
let air dry completely before
using again. Do not dry in
clothes dryer.
10
To re-attach the bonnet, pull
one corner of the bonnet over
the steam nozzle then the other
corner. Secure the bottom of
the bonnet to the nozzle using
the bottom tab.
6
Bundle up the power cord and
secure it with the VELCRO
®
strap that is attached to the
power cord. Always store your
appliance in a cool, dry area.
Care & use of the small steam
bonnet frame
7
The steam bonnet helps filter
impurities from your water.
It might become slightly
discolored over time.
8
Let the steamer cool completely
before removing the bonnet.
Gently pull on either side of
the bonnet to remove from the
steam nozzle.
GS500Q_IB_ES_101123.indd 13
10-11-24 10:11 AM
