background image

7

www.sharkclean.com

Cleaning with the Vacuum Accessories

Before cleaning with your  
accessories:
Stand vacuum into upright position.

Secure Super  
Stretch Hose in  
the anti-tip hose  
hook to prevent  
tipping.

Select the “I" - On position for  
suction only cleaning.
  

DO NOT

 pull vacuum cleaner 

around by the hose.

 

DO NOT

 overextend the hose.

Vacuum Accessories

Your vacuum comes with a Super 
Stretch Hose and Cleaning Wand 
with handle. Use one or the other to 
attach your cleaning accessories.

1

 

Using the Super Stretch Hose:

 

 Stand the vacuum into upright  
position.

 

 Remove the hose from the 
Cleaning Wand with handle.

 

 Push the selected tool into the 
hose connector.

1

3

4

5

6

2

 

Using the Cleaning Wand:

 

 

 Stand the vacuum into upright 
position.

 

 Remove the Cleaning Wand with 
handle (with hose attached) 
from the unit.

 

 Push the selected tool into the 
end of the Cleaning Wand.

 

 For a longer reach, add the extra 
Cleaning Wand (7) and then 
attach the various accessories.

3

 

 Pet Hair Power Brush

4

 

 Dusting  Brush

5

  

Crevice Tool

6

  

16” Crevice Tool 
Note: 

Remove the crevice tool 

from the Cleaning Wand to use

.

7

  

Extra Cleaning Wand

To order additional parts and accessories,  
go to www.sharkclean.com or call  
1-800-798-7398.

2

3

4

5

6

7

NV80_26_IB_E_111130_3.indd   7

11-11-30   3:26 PM

Summary of Contents for NV80

















Reviews: