background image

sharkclean .com

sharkclean .com

QUICK  

START  

GUIDE

GENERAL WARNINGS

1. 

 Your vacuum cleaner may consist of 

a motorized nozzle, wand, hose, and/

or vacuum pod. This device contains 

electrical connections, electrical 

wiring, and moving parts that 

potentially present risk to the user.

2.  

Use only identical replacement parts.

3.

   Carefully observe and follow the 

instructions provided below to avoid 

improper use of the appliance. 

DO 

NOT

 use the vacuum for any purpose 

other than those described in this 

manual.

4.

   Before use, carefully inspect all parts 

for any damage. 

DO NOT

 use if any 

parts are damaged.

5. 

 The use of an extension cord is  

NOT

 recommended.

6.  

This vacuum cleaner contains  

no serviceable parts.

USE WARNINGS

7.   DO  NOT

 allow the appliance to be 

used by children. Close supervision is 

necessary when used near children. 

This is not a toy.

8. 

 Always turn off the vacuum cleaner 

before connecting or disconnecting 

any motorized nozzles or other 

accessories.

9.   DO  NOT

 handle plug or vacuum 

cleaner with wet hands.

10. 

 

DO NOT

 use without filters in place.

11. 

 Only use Shark® branded filters  

and accessories. Failure to do so  

will also void the warranty.

12.

  

DO NOT

 damage the power cord:

 a) 

 

DO NOT

 pull or carry vacuum 

cleaner by the cord or use the 

cord as a handle.

 b) 

 

DO NOT

 unplug by pulling  

on cord. Grasp the plug, not  

the cord.

 c) 

 

DO NOT

 run the vacuum cleaner 

over the power cord, close a door 

on the cord, pull the cord around 

sharp corners, or leave the cord 

near heated surfaces.

13. 

 

DO NOT

 put any objects into nozzle 

or accessory openings. 

DO NOT

 use 

with any opening blocked; keep free 

of dust, lint, hair, and anything that 

may reduce airflow.

14.   DO  NOT

 use if nozzle or accessory 

airflow is restricted. If the air paths or 

the motorized floor nozzle become 

blocked, turn the vacuum cleaner 

off and unplug from electrical outlet. 

Remove all obstructions before you 

plug in and turn on the unit again.

15.  

Keep nozzle and all vacuum 

openings away from hair, face, 

fingers, uncovered feet, or  

loose clothing.

16.   DO  NOT

 use if vacuum cleaner is  

not working as it should, or has been 

dropped, damaged, left outdoors, or 

dropped into water.

   WARNING 

To reduce the risk of fire, electric shock, injury, or property damage:

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY • PLEASE READ CAREFULLY BEFORE USE
If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, 

contact a qualified electrician. DO NOT force into outlet or try to modify to fit.

To reduce the risk of electric shock, this appliance has a polarized plug (one blade 

is wider than the other). This plug will fit in a polarized outlet only one way. If the 

plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a 

qualified electrician to install the proper outlet. Do not change the plug in any way.

SAVE THESE INSTRUCTIONS

17.  

Use extra care when cleaning  

on stairs.

18.   DO  NOT

 leave the vacuum cleaner 

unattended while plugged in.

19.  

When powered on, keep the vacuum 

cleaner moving over the carpet 

surface at all times to avoid damaging 

the carpet fibers.

20.   DO  NOT

 place vacuum cleaner  

on unstable surfaces such as chairs or 

tables.

21.  

Your Shark® Vacuum may not  

be designed to stand up on its own. 

When taking a break from cleaning, 

you may need to lean it against 

furniture or a wall, or lay it flat  

on the floor. Using the vacuum  

for an application where the unit 

lacks stability may result in  

personal injury.

22.   DO  NOT

 use to pick up:

 

 a) 

 Liquids

 

 b) 

 Large  objects

 

 c)   

Hard or sharp objects  

(glass, nails, screws, or coins)

 

 d)   

Large quantities of dust (drywall 

dust, fireplace ash, or embers). 

DO NOT

 use as an attachment to 

power tools for dust collection.

 

 e)   

Smoking or burning objects  

(hot coals, cigarette butts,  

or matches)

 

 f) 

 Flammable or combustible 

materials (lighter fluid, gasoline, or 

kerosene)

 

 g)   

Toxic materials (chlorine bleach, 

ammonia, or drain cleaner)

23. DO NOT

 use in the following areas:

  a)  

Poorly lit areas

  b)  

Wet or damp surfaces

  c)  

Outdoor areas

 

d)  

Spaces that are enclosed and may 

contain explosive or toxic fumes 

or vapors (lighter fluid, gasoline, 

kerosene, paint, paint thinners, 

mothproofing substances, or 

flammable dust)

24.  

Turn off all controls before plugging in 

or unplugging the vacuum.

25. 

 Unplug from electrical outlet  

when not in use and before  

any maintenance or cleaning.

26.  

Hand wash with water only.  

Washing with cleaning chemicals 

could damage the unit.

27. 

 During cleaning or routine 

maintenance, 

DO NOT

 cut anything 

other than hair, fibers, or string 

wrapped around the brushroll.

28.  

Allow all filters to air-dry completely 

before replacing in the vacuum to 

prevent liquid from being drawn  

into electric parts.

29.  

Make sure the dust cup and all filters 

are in place after routine maintenance.

30.  

If provided, secure the power  

cord around the two cord hooks 

during storage.

Summary of Contents for Navigator Lift-Away Zero-M Speed ZU560










Reviews: