6
TOLL FREE:
1-800-798-7398
IMPORTANT:
Your steam mop needs
water to make steam! Never use your
steam mop without water in the tank.
Sweep or vacuum your floors prior
to cleaning with your
Light & Easy™
Steam Mop.
Visit
www.sharkclean.com
for other
great quick cleaning products to
complement your
Light & Easy™
Steam Mop, such as the
Shark
®
Navigator.
Using Your Light & Easy™ Steam Mop
1
Pull and twist the quick release
cord holder to unwrap the power
cord completely. (
fig. 1
) Plug into
an electrical outlet. (
fig. 2
) The
“
On
” light will turn blue. If the light
does not turn on, reference the
troubleshooting section on page 10.
(
fig. 3
)
When you use your steam mop for the
first time or if you have not used the unit
in awhile, it may take a minute or two
for the water to travel through the pump
and into the heater to create steam. Get
it started by pumping the handle a few
times. If you have waited a few minutes
and you still do not see any steam,
reference the troubleshooting section
on page 10.
fig. 1
fig. 2
fig. 3
