background image

6

TOLL FREE:

 

1-800-798-7398

7

www.sharkclean.com

English

 

IMPORTANT:

 Your steam mop needs 

water to make steam!  Never use 
your steam mop without water in the 
tank.

 

Sweep or vacuum your floors prior 
to cleaning with your 

Light & Easy™ 

Steam Mop.

 

Visit 

www.sharkclean.com 

for other 

great quick cleaning products to 
complement your 

Light & Easy™ 

Steam Mop, such as the 

Shark

®

 

Cordless Stick Vac.

Using Your Light & Easy™ Steam Mop

1

  Pull and twist the quick release 

cord holder to unwrap the power 
cord completely. (

fig. 1

)  Plug into 

a 120-volt electrical outlet. (

fig. 2

)  

The “

On

” light will turn blue.  If the 

light does not turn on, reference the 
troubleshooting section on page 12. 
(

fig. 3

)

2

  Wait 30 seconds for the boiler to 

heat the water.  Pump the handle 
a few times to prime the pump, 
activate steam and moisten the 
micro-fiber pad. (

fig. 4

3

  Mop with a forward and backward 

motion to customize steam output 
automatically. (

fig. 5

)

When you use your steam mop for the 
first time or if you have not used the unit 
in awhile, it may take a minute or two 
for the water to travel through the pump 
and into the heater to create steam.  Get 
it started by pumping the handle a few 
times.  If you have waited a few minutes 
and you still do not see any steam, 
reference the troubleshooting section 
on page 12. 

If your 

Light & Easy

 

Steam  

Mop stops steaming, it could 
be out of water. Unplug the 
power cord from the electrical 
outlet and refill the water tank 
at anytime.

1

fig. 1

fig. 4

fig. 5

fig. 2

fig. 3

S3250_instructions_100526.indd   6-7

10-05-27   9:58 AM

Summary of Contents for LIGHT & EASY S3250 11












Reviews: