7
8
0800 862 0453
sharkclean .co.uk
ASSEMBLING
YOUR StEAM MOP
1
Insert the steam mop
handle into the steam
mop body. Push the
handle in until you
hear it click into place.
2
Slide the Klik n' Flip®
Mop Head into the
steam mop body.
Push until you hear
it click securely into
place. To detach the
Klik n' Flip® Mop Head,
press the release
button and slide off.
3
To attach the Dirt
Grip™ pad, spread
the pad on the floor
with the pocket side
up. Center the Klik n'
Flip® Mop Head above
the pad
(FIG. 1)
, then
press the pad release
button on the back of
the steam mop body.
(FIG. 2)
Both sides of
the Klik n' Flip® Mop
Head will drop open.
(FIG. 3)
Slip the Klik n'
Flip® Mop Head’s four
corner tabs into the
four corner pockets
of the pad
(FIG. 3)
Gently press one side
of the Klik n' Flip® Mop
Head to the floor until
that side clicks into
place.
(FIG. 4)
Repeat
on the other side.
(FIG. 5)
4
Pull down on the
water tank lid to open.
5
Use the filling flask to
pour water into the
water tank. Water can
be poured into the
tank directly. Do not
overfill past the water
line on the fill flask.
Press the water tank
lid firmly to close it.
WARNING:
Always
make sure the steam
mop is UNPLUGGED
when not in use. Never
fill the steam mop or
attach the mop head
when the steam mop
is plugged into an
electrical outlet. Unplug
from the electrical outlet
and allow to cool before
you fill the steam mop,
or attach or remove the
head. To prolong the
life of your steam mop,
we recommend using
distilled water. Make
sure you add only water
to the tank. Chemicals
or cleaning solutions
(including vinegar) may
damage the steam mop
and could be unsafe for
you and your family.
FIG.2
FIG.3
FIG.4
FIG.6
FIG.7
FIG.5
FIG.1