INSTALLING AND REMOVING THE FILTER
NOTE:
Always remove all protective packaging from the filter before installing.
When the filter timer has 0% remaining, the FILTER LIFE button on the top control panel will blink, indicating that it’s time to install a new
filter.
1.
Turn off and unplug the unit before removing or installing filters.
2.
Carefully flip the air purifier upside down. Remove the bottom
filter by twisting to the unlocked position.
3.
To remove the old filter, pull it out by the removal tabs. Discard
old filter in trash.
4.
Remove all packaging and wrapping from the new filter.
5.
Insert the new filter, then replace the filter door. Twist the filter
door until it clicks into place.
6.
Carefully, return the air purifier to the upright position. Plug the
unit back in and turn on power. Calibration will begin.
7.
After installing a new filter, press and hold the Filter Life button
on the top control panel for 3 seconds to reset the filter life
percentage. The unit will beep when the filter life is reset to 100%.
Disposing of used filters
Filters can’t be cleaned or recycled. After removing a used filter, wrap it in an airtight plastic bag for disposal. As an extra precaution, wear
gloves when handling a dirty filter.
MAINTAINING YOUR AIR PURIFIER
NOTE:
Always unplug the unit before doing any cleaning or maintenance.
Exterior Cleaning:
For best results, clean the exterior of the unit every two months or
as needed. Use a microfiber cloth to remove dust. To sanitize, wipe
down the exterior with a microfiber cloth dampened with warm,
soapy water. Avoid excess water and abrasive chemical cleaners to
prevent damage.
To maximize your air purifier’s filter life, we recommend flipping
and rotating the direction of your filter every three months. This
will help equalize and balance the distribution of captured particles
throughout the filter allowing for extended usage.
Interior Cleaning:
For best results, clean the interior of the unit every two months
or as needed. Remove the filter door, take out the filter, and use a
vacuum cleaner or a microfiber cloth to remove dust and debris
from the interior of the unit.
DO NOT
use abrasive chemical
cleaners on the inside of the unit.
3
Remove
filter
from
plastic
packaging
2
1
