SETTING UP YOUR UNIT
Parts:
1.
Air Output Vents
2.
Control Panel
3.
Front Display
4.
Air Purifier Base
5.
Air Intake Vents
6.
Filter
7.
Filter Door
1.
First, carefully flip the air purifier upside
down and place it on a level surface.
Twist the filter door to unlock the filter.
2.
Take the filter out of its packaging,
then insert it back into the unit.
DO NOT
run the air purifier unless
the filter is removed from its packaging
and properly reinstalled.
3.
With the filter reinstalled, twist the filter
door until it clicks into place.
4.
Set up the unit on a level surface, at
least 3 inches (8 cm) away from walls
and objects.
5.
Plug the unit into an electrical outlet
and press the power button on the top
control panel.
6.
When the unit is powered on, it will begin
to analyze the air quality indicated by the
rotating lights. After a few seconds the
unit will display the current air quality.
3 inch
minimum
4
3
2
Remove filter
from plastic
packaging
5
6
1
1
2
3
7
4
5
6
TIPS FOR SETTING UP YOUR UNIT
• Make sure the front panel of the unit faces away
from the closest wall.
• Do not move the unit while it is running. Turn
off the power and unplug the unit before
moving it.
• Make sure the vents are not blocked.
• Do not place anything on the air purifier.
• Do not place the air purifier near heaters or
radiators.
• Keep the unit out of direct sunlight and away
from water or other liquid.
• Keep all nearby doors and windows closed
when operating the air purifier.
• Avoid using in very humid environments.
