Shark CB-750 User Manual Download Page 5

 

CHARGING MODES 

CB-750 has three modes: Standby,12V and 6V. Do not operate the charger until you confirm 

the appropriate charge mode for your battery. 

 
 
 
 
 
 
 

 

NOTICE: 

Make sure your battery to be charged / maintained is in good condition. The CB-750 

cannot be used to recover severely discharged batteries or dead batteries. 

How to deal with the batteries which are deeply discharged, but in good condition? 

1.

 

Make sure the battery is in good condition (not dead) and was deeply discharged only. You 

can use the battery analyzer to get the result if you have. 

2.

 

Jumpstart your vehicle or use a battery charger with recovery function to activate the battery 

until the battery voltage increases to normal condition. For 12V batteries, the normal voltage is 

above 8 volt at least; for 6V batteries, the normal voltage is above 4 volt at least. 

3.

 

Use the CB-750 Charger / Maintainer do the rest charging and maintaining work. 

Mode 

Explanation 

Standby 

   Not charging or providing any power (Green LED) 

12V 

Charging and Maintaining 12V WET/GEL/MF/EFB 

batteries (Blue LED) 

6V 

Charging and Maintaining 6V WET/GEL/MF/EFB 

batteries (Green LED) 

 

Summary of Contents for CB-750








Reviews: