3
3)
Do NOT expose to rain or wet conditions.
4)
Connect and disconnect DC output only after setting AC cord from electricoutlet.
5)
Use of an attachment not recommended or sold by the manufacturer may result in a risk of
fire, electric shock or injury to persons.
6)
Do not overcharge batteries by selecting the wrong charge mode.
7)
To reduce the risk of damage to electric plug and cord, pull by the plug rather than the cord
when disconnecting charger.
8)
To reduce risk of electric shock, unplug charger from outlet before attempting any
maintenance or cleaning.
9)
Operate with caution if the charger has received direct hit of force or been dropped. Have it
checked and repaired if damaged.
10)
Any repair must be carried out by the manufacturer or an authorized repair agent in order
to avoid danger.
ABOUT SHARK CB-750
1)
The CB-750 is perfect for keeping all of your 12V and 6V lead-acid batteries in top condition,
including WET (Flooded), GEL, MF (Maintenance-Free) and EFB (Enhanced Flooded Battery) .
2)
Built-in intelligent microprocessor makes charging and maintaining faster, easier and safer.
3)
This charger has safety features, including spark proof, protection for reverse polarity, short
circuit, overcurrent and overcharge.
4)
It has auto-memory, which returns to last selected mode when restarted.
5)
When Emerald Green LED is flashing, the charger is in bulk charge at a constant 1000mA
rated current output. When Emerald Green LED turns to solid, the battery is fully charged.
6)
Since this is a battery maintainer and you will keep it connected with vehicle battery for a
long time, do monitor monthly. Follow the battery manufacturer’s instructions for adding
distilled water if applicable.
7)
Following is the charger’s technical specification:
AC Input
220-240V AC, 50-60Hz, 0.25A
DC Output
12V DC, 0.75A;
6V DC,
0.75
A
Start Voltage
> 1V
Housing Protection
IP
60
- Protect from dust ingress