manualshive.com logo in svg

Shark BT-3530, Operating Instructions And Parts Manual, Page: 6 / 33

Share
Download
Shark BT-3530 Operating Instructions And Parts Manual Download Page 6

97-727, 96-721  •  REV. 4/06

OPERA

T

OR’S MANU

AL

    

PRESSURE W

ASHER

6

COMPONENT IDENTIFICATION

Pressure Nozzle

Soap

Nozzle

GFCI

Power

Supply

Power

Cord

Spray

Gun

Trigger

Start/Stop

Switches

Swivel

Connector

Inlet

Connector

Wand

Detergent

Tube

High Pressure Hose

Oil

Dipstick

Water Supply Hose

(not included)

Oil Level

Sight Glass

Detergent

Injector

Nozzle

Quick

Coupler

Detergent Bucket

(not included)

Detergent Injector

 - Allows you to siphon and mix de-

tergents.

High Pressure Hose

 - Connect one end to water pump

discharge nipple and the other end to spray gun.

Nozzle Quick Coupler

 - To easily connect the high

pressure hose and soap nozzle to wand.

Oil Level Sight Glass

 - A quick visual reference to the

oil level in the pump.

Pump

 - Develops high pressure.

Pump Protector

 - Cycles fresh cool water through

pump when recirculating water reaches 140°F.

Spray Gun

 - Must be connected to the high pressure

hose and wand.

Swivel Connector

 - Connects to the spray gun and

wand. Minimizes hassle of hose coiling.

Wand

 - Must be connected to the spray gun.

Note

:

 If trigger on spray gun is released for more

than 2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto
floor.  This system prevents internal pump dam-
age.

Pump Protector

Pump

Summary of Contents for BT-3530


































Reviews:

No comments