7
5) During the camera start up process, the time setting or camera setting interface will
appear on the image transmission interface. At this time, the camera initialization will
automatically switch the interface. After the camera is turned on, the image transmission
image display will enter the photo interface.
3.1.2 Using J30J-15 Port
The oblique camera uses external power through XT30 plugger. It will automatically start up
when power on. Step of power on:
1) Mount the SHARE 202S Pro V2 on the drone, and please make sure the installation is firm.
2) Turn on the power of the drone, the camera will start to self-checking. It will take about
40s to power on. When it’s done, the camera beeps.
3) After the camera is turned on normally, the OLED will display as follows:
OLED Display
Meaning
Remark
ON
The camera is power on
When power off, it will show OFF
999
Initial value in PWM mode
TTL mode and TTH mode trigger photo
display time value when triggered
30
℃
Camera temperature
Current camera temperature
P
Number of instructions
triggered on taking photo
The times needed to be triggered
F, R, D, B, L
Number of taking photo
on different lens
F - the front vision, R - the right vision
D - the down vision, B - the back vision
L - the left vision
(It will restart and clear after the
camera power off)