Installation / User’s Guide
30
VI. User’s Operation
The Speed Domes have been implemented and compatible to PELCO (D/P type) protocol
that works with all devices such as DVR, Video Servers, PC, and keyboards that
compatible to the same protocol for system integration and operation handy.
1. Locate a Speed Dome in a system
Set ID address of a speed dome
：
The ID address of each Speed Dome has to be unique and only one in a system; it can
be set by the on-board dip-switch that fore-mentioned on page 6. When the ID
address set properly, by external controller and keyboard, the Speed dome will be
operated and controlled. The speed domes can be programmed up to 128 of ID
address. However, subjected to different control device and keyboard, the maximum
number of speed dome in a system will be various. For example, if controlled by
MCU-PTZ091, there are maximum 99 units of speed domes in a system at direct
connection mode.
To call a speed dome
：
If the protocol and ID address of a speed dome has been properly setup, the keyboard
will be able to call and operate the speed dome. For say, if a speed dome set ID as
#1 and controlled by MCU-PTZ091 keyboard, you can press “1” and “CAM” on the
controller’s keypad, you will then configure to the speed dome by the keyboard and
control/operate the speed dome (at ID #1). The users can do the same for other
configured speed domes in the system by calling their proper ID number.
2. PTZ Operation & Control
PAN (360˚) movement
The speed dome can move continuous 360 with controls. The speed dome features
64-step speed to correspond with the operation at the joystick
—
when user move the
joystick fast, the speed dome will move fast; and, vise versa.
TILT (90˚) movement
With keyboard, the Speed dome can perform vertical movement (from 90 to 0 ) at
various speed, including Auto-flip function.
Auto Flipping
When tilt down at 90 position, the speed dome will automatically flip over to track or
follow a moving object beneath and passing by.
Focusing
With auto-focus feature, it will focus on the center of the view window automatically to
ensure the image stays clear and sharp. Focus can also be adjusted manually to
suit users
’
preferences.
