Installation / User’s Guide
21
(1) Please release the screws attached under the mount hardware to it’s
most flexibility.(In case of mounting on the 20mm ceiling).
(2) Push the hardware up to the most-upper-position of the excavated ceiling, and
meanwhile ,the clips will be stuck on the ceiling.
(3) Fasten the released screws and then the clip will fix on the ceiling.
Step 3
(1) Take the driving-unit from the package and set the related setting of the dip switch.
(2) Connect the hook and safety-ring to avoid accidental falling.
(3) Hold the driving-unit, connect the terminal to the socket, and then twist clockwise to
fix the board.
Hook
Safety-ring
Driving-unit
Mount-bracket
Twist clockwise to fasten
Check the upper
position
