Shadow MEGATECH 8, User Manual

Page: 6 / 17

9 8
Adjusting the 6 band equalizer. Select the band range by pressing
the L (left) and R (right) buttons to move the cursor – the active
frequency bar selected will blink. The selected frequency value (shown
here 0.2 as 200 Hz) and amplification value (shown here + 08 dB) will
be displayed up to + / – 12 dB.
To change the value turn the potentiometer rotary pot. Select the
next frequency and adjust as described. To start with a flat response
(all frequency bars at 0 dB) press and release FLT then adjust the
frequency bars as desired.
Equalizer Options
Push and release
the EQ button and
the 6 band equalizer
screen will appear
next.
Press and release ESC to activate changes
and return to the previous menu screen.
When you are finished ...
Factory Preset Bank 1
Press and release ESC to move to the next factory preset bank ...
Press and release EQ to adjust the equalizer - page 8.
Press and hold EQ to adjust the selection´s parameters - page 12.
Turn the rotary pot to adjust the volume.
The MT-8 will always
start with DNT
Push and release a
button to change to
the desired preset;
CHR for example.
The arrow will
appear next to
your selection.
Dreadnought - This effect will simulate the acoustics of a
typical dreadnought quitar with light reverbaration.
Dreadnought with chorus - The dreadnought acoustics are
accompanied with a chorus effect.
Dreadnought with reverbaration - Reveb will accentuate the
dreadnought acoustics.
Dreadnought lead - The quitar will have crisper sound when
playing lead.
Tremelo effect - A dreadnought sound with a noticable
tremelo effect.
Delay effect - A delay effect will accompany the sound.
L R
Any
adjust-
ments in
the
EQ
option will only
affect the selected
preset.
Bar Value
0.2 = 200 Hz
0.5 = 200 Hz
1.2 = 1.2 KHz
2.4 = 2.4 KHz
5.4 = 5.4 KHz
9.2 = 9.2 KHz
00398_MT8_Anleitung_B_LY 25.09.2000 14:29 Uhr Seite 12