Shadow MEGATECH 8, User Manual

Page: 12 / 17

21 20
Saving a User Preset
Recalling a User Preset
Say you have
fine tuned the
DNT parameters
and want to save.
1.
Press and release
ESC until a user pre-
set bank appears.
2.
Select an empty
position, here
B4
for example.
Press and hold B4
and the MT-8 will ask
if you want to save to
this position.
3.
You return to the
previous screen
if you select
NO.
When YES is
selected, the MT-8
will permanently save
your adjustments to
the selected position
then return to the
previous user preset
screen.
…recall your saved
preset by selecting
the position,
C3 for example.
Press and release
ESC until the user
preset bank with your
saved effect position
appears…
If you press and hold the button over a factory preset, you can
not save any adjustments.
Move to a user preset, then save!
Tip:
Write down where you just saved to prevent overwriting!
1
2
3
Remember
to save to
the same
or a new
user preset position
if further parameter
adjustments are
made. These must
be manually saved!
00398_MT8_Anleitung_B_LY 25.09.2000 14:29 Uhr Seite 24