Slide one end of the Player rods through the cabinet
NOTE:The Player Rods have a hole on the end where the Rod Grips
will go in the next step.
Player Rod Assembly:
Place one Rubber Bumper (#10) on the rod.
Place one Plastic Washer (#13) on the rod.
Place the appropriate number of Players (#6 or #7) on the rod (3 Players on the
3-hole rod, 2 players on the 2-hole rod, etc.).
Attach the Players (#6 or #7) on the rod using one Bolt (#8) and one Nut(#9) per
Player.
Place one Plastic Washer (#13) on the rod.
Place one Rubber Bumper (#10) on the rod.
Slide end of the Player rods through the cabinet
Repeat for each rod.
NOTE:The players of each team should be right-side up, facing
their opponent’s goal.
Step 3: