
M833811-00
Shadin Avionics
INSTALLATION MANUAL
AIS-380 FUEL FLOW ADAPTER
Rev: C
P/N 833811-00
Page: 5 of 20
Shadin Avionics
6831 Oxford Street
St. Louis Park, MN 55426
USA
The features which are applicable to all standard installations are listed below:
•
Two +12 VDC power supplies are available for powering fuel flow transducers
•
ARINC inputs are echoed to the ARINC outputs
•
ARINC speed (high or low) is configurable. Each ARINC channel input and output speed is matched
when configured, e.g. ARINC channel 1 input channel set for high speed results in ARINC channel 1
output set for high speed
•
Fuel Flow labels 244 (Total Fuel Flow) and 347 (Left and Right independent Fuel Flow based on SDI)
are generated and output at an 8 Hz rate when configured for normal fuel flow format on both ARINC
429 outputs
Specific features for the Bell 412 EPI Installation:
•
Fuel Flow labels 351 (Left Fuel Flow) and 352 (Right Fuel Flow) are generated and output at an 8 Hz
rate when configured for Bell fuel flow format on both ARINC 429 outputs
•
The AIS-380 accepts Bell serial fuel flow parameters on Serial 4 RS-422 port