3
o
f
9
Assembly Instructions
10' Offset Umbrella with Base
Important:
⚫
Read all the instructions before assembly. Failure to do so may result in faulty assembly and
potential injury.
⚫
Before beginning to assemble the product, remove all protective materials, hardware kit(s), and
identify all parts packed in the carton are present. (Note: If any part is missing or damaged, do not
attempt to assemble). Contact Shade N’ Shelters Customer Support Team. See page 9.
⚫
Two people are required to assemble heavy items.
⚫
Assemble product on a soft and non-abrasive surface, such as carpet to avoid damaging the item.
SAFTEY WARNINGS
➢
Completely Fill Poly Base with sand or water prior to assembly and use.
➢
Close and secure the umbrella when not in use or during inclement weather.
➢
Never use umbrella in high wind conditions or near flame/heat sources.
ASSEMBLY INSTRUCTIONS
Step 1:
Place Base Plate (A) across the top of Base Plate (B). Secure the Swivel Plate (C) using Bolts (K)
and Washers (L). Attach the Lower Umbrella Support Post (D) to the Swivel Plate (C) using Bolts
(J) and Washers (L).
Tighten all Bolts.
See Figure 1.
Figure 1
