background image

PAGE 9

SERVICING

If this hydraulic jack if found to be damaged in any way, worn or 
operating abnormally it should be removed from service until 
inspected by an authorised repair centre.

Owner/operators should be aware that the repair of this jack 
requires specialised equipment and knowledge. Only factory 
authorised parts, labels and decals shall be used on this 
equipment. An annual inspection of this jack by an authorised 
repair centre is recommended to ensure the jack maintains an 
optimum operating condition.

Should the trolley jack ever become unservicable, drain off all 
fluid and dispose of in a proper manner, paying heed to any 
environmental preservation regulations. 

WARRANTY

This SGS product is covered by a 24 month warranty from the 
initial date of purchase. This is a domestic warranty provided 
directly by SGS Engineering. Please keep a recipt of your 
pucrchase as this may be required as proof of purchase. 

You will invalidate your warranty if the product is found to 
have been misused, tampered with, modified, overloaded 
or used for an application for which it was not designed. The 
warranty will also be rendered invalid if the maintenance 
prodcedure has not been followed.

You must contact SGS Engineering prior to returning any 
product. This warranty does not effect your statutory rights. 

Summary of Contents for TJH10













Reviews: