background image

PAGE 7

WARNING

•  Read and understand all warnings and instructions prior to use.
•  Do not overload this jack beyond its rated capacity.
•  This jack is a lifting device only.
•  This jack is designed for use on hard level surfaces only.
•  The load must be supported by jack stands once raised.
•  Do not dolly or move the vehicle while it is on the jack.
•  Lift only on areas as specified by the vehicle manufacturer.
•  Only attachments and/or adaptors supplied by sgs shall be used.
•  No alterations to the jack shall be made.
•  Failure to heed these warnings may result in damage to the jack 

and/or failure resulting in personal injury or property damage.

•  Inspect the jack before each use.

WARRANTY

This SGS product is covered by a 24 month warranty from the 
initial date of purchase. This is a domestic warranty provided 
directly by SGS Engineering. Please keep a recipt of your 
pucrchase as this may be required as proof of purchase. 

You will invalidate your warranty if the product is found to 
have been misused, tampered with, modified, overloaded 
or used for an application for which it was not designed. The 
warranty will also be rendered invalid if the maintenance 
prodcedure has not been followed.

You must contact SGS Engineering prior to returning any 
product. This warranty does not effect your statutory rights. 

Summary of Contents for TJ2C









Reviews: