PAGE 25
PAGE 24
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
Step 9.
Place the grid on the
funnel and, with assistance,
place cabinet assembly on
the lower assembly, while
lining up the holes. Open the
door, assemble the cabinet
and funnel with the M6x16
mm bolts and 6 flat washers
Hardware:
22 x M6x16 mm Bolt
22 x 6 Flat washer
#4 Abrasive tee joint
Step 10.
a.
Open the door, insert abrasive hose through rubber
retainer and adjust it, while avoiding sharp bends to help
prevent excessive wearing of the abrasive hose. Next, se-
cure the abrasive hose with a clamp and install the M6x12
mm bolts and M6 nuts.
b.
Connect the abrasive hose to #4 abrasive tee joint and
seal thread with Teflon tape.
WWW.SGS-ENGINEERING.COM