6
ASSEMBLY INSTRUCTIONS
Outlet Box
4
B
D
4. Attach mounting strap (B) to outlet box (not
included) using the existing washers and outlet
box screws or the machine screws (BB).
NOTE:
If
the outlet box screws required for your outlet box
are of a different size than the machine screws
(BB), consult with a licensed electrician before
proceeding.
To help ensure that the fixture (A) is level when
attached, turn crossbar on mounting strap (B) so
that fixture screws (D) are level horizontally.
Tighten the two small screws in the center of the
mounting strap (B) to secure the crossbar on the
mounting strap (B).
Tighten machine screws (BB) completely to
secure mounting strap (B) to outlet box.
CAUTION:
The fixture must be mounted to
an outlet box that is supported by the building
structure and can support the weight of the fixture.
Plastic outlet boxes are not recommended.
Hardware Used
Machine Screw
x 2
Washer
BB
BB
Washer
Adjust fixture screws (D) to proper length by
screwing them completely into mounting strap (B).
Temporarily place fixture (A) over mounting strap
(B) to determine amount of adjustment necessary
for fixture screws (D); fixture screws (D) should
come through holes in fixture (A) just enough so
that decorative nuts (C) will fit flush against fixture
(A) when mounted.
Once fixture screws (D) are adjusted, use pliers
(not included) to tighten nuts (E) on fixture screws
(D) until nuts (E) touch mounting strap (B).
5.
BB
5
Outlet Box
A
C
B
D
E
