12
the
¿
xtures need to be spaced 6 mm apart to obtain the correct
12 cm pixel pitch.
4.
Connect and arrange the power and data cables.
5.
)
asten the TLD-612A securely to a
¿
xed surface or structure,
ensuring that the supporting structure and
or hardware used
can hold at least 10 times the weight of all the devices they
support, as well as all installed accessories.
6.
If suspended from a rigging structure, fasten the TLD-612A
to a rigging clamp with an M10 bolt using the top hole in the
mounting bracket.
7.
Complete the rigging procedure by securing the TLD-612A
with a safety wire using the hole in the mounting bracket.
This safety wire must be approved by
an of
¿
cial body such as T
h
V as a safety
attachment for the weight that it supports.
The safety wire must be capable of
supporting a static suspended load that is
ten times the weight of the
¿
xture.
6mm
Summary of Contents for TLD-612A
