SGM Pilot 2000 Quick Instructions Download Page 7

PILOT 2000 USER GUIDE

Memory Object Keyboard Section

The key buttons and the white printing identify this section.
This section of buttons is used to select the 4 elements that make up the Memory Objects

(Program, Chase, Psycho and Preset). Once they've been programmed, these elements

must be entered in the Memories in order to be run.

Program button:

There are 

40 Programs available

. A program can drive up to 40 units (fixtures). When the

button is pressed (red LED lit), the Multifunction Keyboard can be used to select a
program. If used in edit mode (edit LED blink and program LED lit), the key let the operator

to create or modify the desired program.

Chase button:

There are 

40 Chases available

. A chase drives up to 192 dimming channels. When the

button is pressed (red LED lit), the Multifunction Keyboard can be used to select a chase.
If used in edit mode (edit LED blink and chase LED lit), the key let the operator to create or

modify the desired chase.

Psycho button:

There are 

40 Psychos available

. A psycho let the dimming channels to be assigned to

the sound frequency bands (LOW; MID LOW; MID HIGH; HIGH). When the button is

pressed (red LED lit), the Multifunction Keyboard can be used to select a psycho. If used
in edit mode (edit LED blink and psycho LED lit) the key let the operator to create or

modify a psycho.

Preset button:

There are

 40 Preset available

. A preset is a scene, which uses only the dimming

channels. When the button is pressed (red LED lit), the Multifunction Keyboard can be
used to select a preset. If used in edit mode (edit LED blink and preset LED lit) the key let

the operator to create or modify a desired preset.

Unit Button

Unit button:

There are

 40 Units available,

 each of which can contains up to 36 channels. When the

button is pressed (red LED lit), the Multifunction Keyboard can be used to select the
desired unit.

Step Button

Step button:

There are

 40 steps available on each Program and Chase

. When the button is pressed

(red LED lit), the Multifunction Keyboard can be used to select a step of the current

Program or Chase.

  

                       

SGM A/S · Ver. 2.03

  
7

Summary of Contents for Pilot 2000

































Reviews: