PILOT 2000 USER GUIDE
To set and store a group:
1.Press and hold down the
Unit
Key. The display will show “select other units to make a
group” and the light gray buttons below the 6 faders become the 6 storable groups;
2.Press the button of the scan section corresponding to the group to be stored.
3.Now push the MFK buttons according to the scan to be grouped. Green LED blinking
on the MFK (while pushing) will show the group.
4.Release the
Unit
Key; then the group will be stored automatically.
N.B: At item 2 some of the green LED of the MFK might start blinking, showing in that way
the old group stored.
To delete a unit from a group:
The MFK shows the status of a unit using 3 different way:
Green LED not lit
: unit not inserted in the patch or not selected
Green LED lit
: unit inserted in the patch
Green LED blink
: unit selected
1.Now to disable a unit simply push the button until the green LED becomes OFF
To recall a group:
1. Press and hold down the
Unit Key
.
2. Press the button of the scan section corresponding to the group to be recalled.
3. Release the
Unit Key
.
10
SGM A/S · Ver. 2.03