31
7
Place Front Assembly on top of the sealing frame.
8
Screw in the highlighted screws with a TX20 screwdriver (Nm 0,7) (see step 1).
9
Check that the sealing frame is evenly visible all the way around the lens module.
Upgrading the firmware
The firmware installed on the device can be identified using the “Info
→
Firmware version” menu. We recommend that you keep
your device’s firmware up-to-date. Visit
http://www.sgmlight.com
to download the latest firmware.
To perform firmware updates, you need a Windows-based personal computer and a SGM USB 5-Pin-XLR upload cable (avail-
able from your SGM distributor).
Cleaning
To maintain optimal performance, regular cleaning is essential. Cleaning schedules will vary depending on the
operating environment, and the installation should therefore be checked at frequent intervals within the first few weeks of op-
eration to see whether cleaning is necessary. This procedure will allow you to assess cleaning requirements in your particular
situation. If in doubt, consult your SGM dealer for a suitable maintenance schedule.
Clean the P-5 using a soft cloth dampened with a solution of water and a mild detergent. Do not use products that contain
solvents, abrasives or caustic agents for cleaning, as they can cause damage to both hardware, cables and connectors.
Manual_P-5_170x113,3.book Page 31 Monday, January 12, 2015 9:24 AM
