14
Two quarter-turn brackets are supplied with the device if it is to be
flown above the ground. Remove the floor stand/base and rig the P-5
to a support truss or structure using the supplied brackets and suitable
clamps.
Fasten a safety cable (not shown) between the
support structure and the attachment point on
the device. The safety cable must be able to
bear at least 10 times the weight of the device.
The device can be tilted from 0° - 180°. To adjust the tilt angle, loosen the two tilt screws,
one of each side of the device, tilt the device to the angle required and
re-tighten the screws.
CAUTION:
If the device has been operating, always allow it to cool for 15 minutes
before handling.
WARNING!
Always secure an elevated P-5 with a safety cable as backup.
Manual_P-5_170x113,3.book Page 14 Monday, January 12, 2015 9:24 AM
