SGM
GB
Hazer 400
3
4.
S
ETUP
1.
Remove all packing materials from the shipping box. Check that all foam and plastic padding is
removed.
2.
Place Hazer on a flat surface and remove Hazer liquid tank cap.
3.
Your Hazer 400 may come with standard Timer remote HC-1. If you will be controlling your unit
remotely, firmly attach the remote control cable to the proper position.
5.
O
PERATION
1.
Place the unit on a flat surface. Plug power cord into a grounded electrical outlet.
2.
Set the power switch to “
ON
” on the back of the machine. Make sure that the red indicator light is on.
3.
Remove the black liquid tank cap, pour Hazer liquid into the liquid tank about 1/2 full, be careful not to
exceed the maximum fluid level. DO NOT OVERFILL. Use only dealer-recommended high-quality Hazer
liquid . Any other types of fluid may cause health hazard and damage the unit. Use of any other liquid
may void warranty.
4.
Connect the remote controller to the unit, press the red button ON/OFF to start up the unit. (For further
information on operating (including DMX) your SGM HZ-400 Hazer, see the section titled, ”Remote
Control Operation”).
5.
There’s an adjustable nozzle blade where you can adjust the angle of the Hazer output by adjusting the
thumb screws indicated below:
SGM Hazer 400 machine produce safe, dry clean and virtually invisible Hazer when used with HZL-1 Hazer
liquid with an extremely long hanging time. For ideal results, Hazer when touch-up is needed.
Thumb Screws
Nozze Output Blade
Liquid Level Indicator
www.audiovias.com
