8
Installation
Giotto profile rel.1.0
1.2 Access to internal components
Giotto fixtures have a simple head opening mechanism.
All work must ALWAYS be carried out by qualified technical personnel.
ATTENTION: make certain that the fixture is switched off and that there is no risk of burns due to high component
temperature (wait at least 30 minutes after switching off)
To access internal components, proceed as follows:
1. Loosen the two screws shown in Fig.1 on both sides of the fixture
2. Remove the cover (1) in the direction indicated by the arrow (Fig. 2)
Fig. 1
Fig. 2
3. Unscrew the two threaded pins (5)(6) as shown in Fig.3
4. Swivel the whole block downwards (Fig. 4)
Fig. 3
Fig. 4
6
5
1
