Page 6 of 20
The
VLW601
program module has 4 buttons (fig. 21) which allow to perform all operational, control and programming
instrument functions.
In the configuration menus, is possible:
a)
Submenus and parameters access; press
to select and press
to access.
b)
Parameter options choice: Press
to select the option and press
to store the option.
Press
to exit without storing
c)
Configure the parameter values; in some parameters the configuration is done by setting a value (eg., in the
SET DISTANCE 4mA
parameter is possible to change the the corresponding distance value, in mm): press
to
select the digit to be modified (the digit is highlighted in
inverse
), press
to change the highlighted digits
number, press
to save the set value and exit automatically. Press
to exit without storing.
In the display top right, during the settings, there is always a number, eg. “1.2”. This number is the menu or
parameter index that’s displayed. The menu structure is represented on page 7 and on pages 9÷10.
OK
OK
BK
4321
mm
D
!
OK
BK
- Configuration access
- Options confirmation
- Parameters values confirmation
- Parameters values modification
OK
BK
- Exit configuration
- Back to previous menu
- Eco map (from RUN mode)
- Parameters values selection
- Parameters scroll
Fig.21
PTU5x
- Configuration and Quick Start
5. QUICK START MODE
From “RUN” mode press
to access the Quick
Setup menu
OK
OK
BK
4321
mm
D
!
OK
OK
BK
SET DISTANCE 4mA 0
SET DISTANCE 20mA
MEDIUM
FILTER COEFFICIENT
BLIND DISTANCE
DISPLAY
OK
OK
BK
SET DISTANCE 4mA 0
SET DISTANCE 20mA
MEDIUM
FILTER COEFFICIENT
BLIND DISTANCE
DISPLAY
OK
OK
BK
FILTER COEFFICIENT
010
0.4
Select the parameters by
moving the cursor with
,
and confirm with
;
press
to exit
With the
VLW601
module is possible to access two configuration modes for the
PTU50- 51-56
setting:
QUICK START
- Menu with easy access for quick basic parameters configuration.
To access: from “RUN” mode press
to the quick setup menu mode access,
to exit
ADVANCED CONFIGURATION
- Full menu with access to all parameters, including functional parameters.
It is recommended to carefully read the complete documentation before accessing.
To access: from “RUN” mode,
holding down
, press
to the advanced configuration mode access,
to exit
WARNING!
- The documentation provided with the
PTU50-51-56
contain the most
frequently used indications. If it’s necessary refer to the full manual, it can be downlo
-
aded from our website
www.sgm-lektra.com
, in the products section.
