SGC PowerTalk Head w/ADSP & SNS 04-22 Installation And Operation Manual Download Page 43 | Manualshive

Page: 43 / 72

SGC PowerTalk Head w/ADSP & SNS 04-22 Installation And Operation Manual Download Page 43

PowerTalk™ Manual

39

SGC Inc. SGC Building, 13737 S.E. 26th St. P.O.Box 3526, Bellevue, WA. 98009 USA

Fax: 206-746-6384 • Tel: 206- 746-6310 • 1-800-259-7331

© 1994 SGC, Inc.

June 28, 2004; 15:46

INTCM / XCV

The SG-2000's intercom system is unique, allowing
communication between the user and any or all of up to
eight separate control heads. By engaging this button and
"0", the user may communicate with all control heads by
using the microphone. Engaging this button then pressing
the number of another control head (1 - 8) enables the user to
privately communicate with a specific control head. The
control head ID numbers are programmed at the factory and
the control head number, which is permanently etched into
the memory of the control head MicroProcessor can be
displayed by pressing the "SHIFT /FUNC" and then the
number 0 on the keypad. The LCD will display the head
number in the frequency window.

CLOCK / DATE

The lower left hand corner of the display shows the current
time or date. Either option may be selected by engaging this
button. The default setting preferred by most users is the
clock function. Time is displayed in military (24 hour) format.
If you are making position sightings, you may wish to check
the clock periodically against the U.S. Bureau of Standards
time stations, WWV and WWVH. These may be found 24
hours a day on 2.5, 5, 10, 15, and 20 MHz providing time of
day, storm warnings and navigation aid updates including
the status of GPS satellites.

TIMER

This button engages/disables the alarm time programmed
into the unit. (See Function Operation Instructions). When
engaged, the unit will automatically shut down at midnight
if there is no previous pre-programmed time. The SG-2000
may be programmed to turn on, tune to a pre-assigned
frequency and mode of operation to receive daily broadcasts.
At the end of these broadcasts, the radio can then be
programmed to turn itself off.

This feature is used to schedule receiving weather faxes in
unattended operation. It may also turn on the radio for a
regularly scheduled net or if you want to use the SG-2000 as
a sophisticated clock radio.

STEP

The Step function is used in conjunction with the frequency
function to allow the operator to select the size of frequency
step. The steps are in preprogrammed increments of .1 (100

«
...
41
42
43
44
45
...
»

Summary of Contents for PowerTalk Head w/ADSP & SNS 04-22









































































Reviews:

No comments