PowerTalk™ Manual
23
SGC Inc. SGC Building, 13737 S.E. 26th St. P.O.Box 3526, Bellevue, WA. 98009 USA
Fax: 206-746-6384 • Tel: 206- 746-6310 • 1-800-259-7331
© 1994 SGC, Inc.
June 28, 2004; 15:46
SCAN BY CHANNEL -
The scan by channel is no longer initiated by the SCAN,
CHAN, then up and down arrows. The key sequence is SCAN, CHAN. The
initial direction is up from the displayed channel.
CHANGE CHANNEL SCAN DIRECTION -
While scanning by frequency, the
scan direction can be changed by rotating the TUNING KNOB which replaces
the up and down arrows. Counterclockwise scans down. Clockwise scans up.
SCAN RATE -
While scanning by channel the scan rate is adjusted by the
TUNING KNOB which replaces the up and down arrows.
The key sequence is
RATE, then rotate the TUNING KNOB, then push RATE again (or wait for time-
out) to set rate value. Scanning by channel will resume with the new rate value.
DEFINE SCAN BANK -
In the define scan banks function the next scan bank
memory is optionally selected by the TUNING KNOB which replaces the up
and down arrows. The key sequence is PRGR, SCAN, enter bank #, enter channel
# or (optionally rotate the TUNING KNOB to select the next scan bank memory),
PRGR.
DELETE SCAN BANK -
In the delete scan bank function the next scan bank is
optionally selected by the TUNING KNOB which replaces the up and down
arrows. The key sequence is PRGR, SCAN, enter bank #, (optionally rotate the
TUNING KNOB to select the next scan bank), SHIFT, 7.
SET TIME ON -
In the set time on key sequence the DOWN ARROW button is
replaced by the TUNING KNOB button.
BACKLIGHT LEVEL -
The backlight level adjustment will use the TUNING
KNOB to select the level. The key sequence is SHIFT/FUNC, RATE. This turns
off the backlight. If backlighting is desired, then rotate the TUNING KNOB for
the desired level. There are four levels of brightness to select.
Summary of Contents for PowerTalk Head w/ADSP & SNS 04-22
Page 70: ......