FT817 ADSP
2
Installation
Low Power Board
Catalog Number 70-11
SGC Inc. SGC Building, 13737 SE 26th St. Box 3526 Bellevue, WA. 98009 USA
Fax: 425-746-6384, Tel: 425-746-6310 or 1-800-259-7331
E-mail: [email protected] • World Wide Web:
www.sgcworld.com
©April 2003 SGC Inc
2. Preparation
The ADSP
2
installation provides you with an unprecedented ADSP capability, far beyond
what you can find on most amateur radio transceivers.
Every possible effort has been made to provide you with a simple, easy to use product.
One where you can concentrate on your communication and not on fiddling with knobs.
SGC’s ADSP
2
will give you years of service improving your ability to communicate.
¨
Prepare your work area
¨
Assemble your tools and parts
ADSP
2
board
ADSP
2
switch assembly
Double-stick tape for mounting the board
Tools for disassembling your transceiver
soldering iron suitable for working with Surface Mount Devices
3. Install the ADSP
2
Board
¨
Open your transceiver
¨
Remove the backing from the double-stick foam tape and
attach the ADSP
2
assembly into a convenient location
On the FT817, the best place to locate the ADSP
2
board is in the battery compartment as
shown in the picture below. Alternatively, if battery operation is desired with the internal
batteries, then the board can be installed in a small external box and the necessary wires
run in through gaps in the case.