SG GROUP GENERGY LIMITED1000I, Instructions For Use Manual

Page: 48 / 84

Po
rt
uguê
s
Englis
h
Es
pa
ñol
Po
rt
uguê
s
Englis
h
Es
pa
ñol
46
1. Remove all fuel from the tank with a suction pump and store it in a suitable
container.
NOTE:
Do not use normal plastic
bottles, because some plastics
decompose partially in contact with
gasoline and become it contaminated. If
reused, contaminated gasoline can
damage an engine.
DANGER: Gasoline is explosive
and flammable. During gasoline
handling, never smoke or cause any
spark or flame.
2. To add a gasoline stabilizer
– according to the manufacturer's
recommendations
– one bottle per one liter of gasoline (see specifications).
3. Put back this treated gasoline in the generator tank. Start the generator
and let the engine runs during few minutes so that the treated gasoline
flows through the admission circuit.
4. Then, turn off the generator, turning the fuel valve to the
“OFF”
position. Once stopped, turn back to the
“ON” position. Thus, the fuel valve
is open.
5. With a screwdriver, loosen the carburettor drain screw and let the gasoline
to drain out completely (see the figure below).
6. Once the carburettor is drained, put back the drain screw and turn the fuel
valve
to the
“OFF” position.
7. Change the engine oil. It is recommended that the engine rest with the oil in
good condition.