FW2170 User’s Manual
M4067-00
20
Seyeon Tech Co., Ltd
6. Network Configuration
Configuration the network is dependent on how an IP address is assigned in Ethernet-based
environment, which is static IP, dynamic IP (DHCP). For wireless LAN, additional configuration is necessary
to have a connection with wireless AP.
In the case of wireless models, users have to choose between wired or wireless connection. In other
words, both connections can’t be used at the same time. The way how to choose one of them is whether
wired LAN cable is plugged into the product. When LAN cable is plugged in for longer than 5 seconds, the
wired LAN is activated for data transmission. If LAN cable is unplugged more than 5secconds, wireless LAN
is activated instead. If DHCP Client is selected by user, wired LAN will be activated regardless of condition of
LAN cable. For network configuration, select
Network configuration
from Admin page.
To make a connection to the Internet, it is required to figure out the type of the Internet service you’re
using. Depending on the service type, the network configuration can be in any of
Static IP
,
DHCP Client
.
You need to set up the FlexWATCH
™
Server according to your network type.
6.1.
Network Configuration
6.1.1. Static IP Configuration
Selecting Network Configuration under Network configuration will show variables. Below picture is for
products without wireless LAN.
For static IP, select static IP and input values for IP address, NetMask, Gateway, DNS1, DNS2 and