FW2170 User’s Manual
M4067-00
15
Seyeon Tech Co., Ltd
3. FW2170 Installation and Basic Setup
3.1. Before Installation
Read carefully User's Manual.
Check User’s Network (IP Address, Network Mask and default gateway)
Secure IP address for FW2170.
3.2. Factory Default Settings
The following table shows the factory default condition. Please refer to this when you need to change
the values on admin menu.
Factory Default
Admin ID
root
Admin password
root
IP address
10.20.30.40
Network mask
255.255.255.0
Gateway
10.20.30.1
Table 5 : Factory Default
Note:
Factory default Admin ID and Password are all lower case letters. You can change the
p
assword with Capital letters
.
3.3. Installing FW2170
Following steps are the physical installation process for FW2170.
1.
Fix the FW2170 in place
2.
Connect the FW2170 to the Internet cable through the LAN port.
3.
Connect the power supply of FW2170.
After that, you need to follow the steps below.
Network Configuration: Refer to “IP Installer User’s Manual”
Camera Configuration: Refer to “FlexWATCH
™
Admin Menu User’s Manual”
Service Configuration: Refer to “FlexWATCH
™
Admin Menu User’s Manual”
3.4 Network Configuration
1) Run Internet Explorer and input IP address of FW2170. You will see log in window as below.